Best Concrete Resurfacing Contractors in San Antonio, TX

What types of resurfacing do we offer?

At EMC Concrete Coatings, we offer full line of professional, interior refinishing services for our real estate vendors.  We refinish both porcelain and fiberglass bathtubs, sinks, laminate countertops, and tile walls.

 

What is resurfacing?

Resurfacing – also referred to as reglazing or refinishing is a process by which our technicians repair and clean an existing damaged or stained surface in preparation for an epoxy or urethane finish that is applied by an HVLP spray machine. The refinishing process rejuvenates the existing surface and gives the customer an extended period of use on their old tubs or countertops, without the cost and hassle of removal.

 

What is our resurfacing process?

With any project we take on at EMC, proper prep work is critical. Our trained and certified technicians etch all porcelain surfaces with a non-hydrochloric gel that allows our sprayed-on coatings to properly bond to the substrate. We repair all chips and cracks with a flexible body filler. Our technicians then re-caulk any seams or joints that require silicone. In addition to repairing the surface, our technicians mask off the entire surrounding areas with paper and plastic. This ensures that our finish is professional, and we do not leave behind any sign of overspray or work debris.

What types of equipment are used for resurfacing?

Our technicians are equipped with the latest technology when it comes to sprayers and ventilation systems.  Each refinishing truck at EMC is loaded with 6 stage, Titan Capspray HVLP machines that offer the highest rate of output in the business.  Our professional sprayers help ensure a smooth and uniformed appearance will be achieved when each job is completed.  While our techs are spraying, we run ventilation systems simultaneously that pull fumes and overspray directly out of the home and into the exterior.  These ventilation systems add a layer of protection for our technicians and the potential homeowners and help ensure cleanliness on the job site.

EMC Concrete Coatings is offering resurfacing services to commercial customers only. Call us today at (210) 430-4181

Is Concrete Resurfacing Worth It
What are the benefits of coating my garage or patio floor?

There are a multitude of benefits to coating your concrete surface. Our prep phase will eliminate high spots or surface deficiencies through diamond grinding or shotblasting. In addition, our trained technicians will fill in any cracks, holes, or spalls on your concrete surface prior to any coating being placed. This ensures a smooth and uniform appearance throughout your slab. Concrete is very porous and can make stain removal difficult. With a high-performance coating installed, you will be able to remove otherwise tough stains with a spray of your water hose. And lastly, our floors look amazing! The garage is often overlooked when it comes to renovation/upgrades, but a professionally installed resinous coating will add $$$ to the value of your home.

Do you offer free on-site quotes?
Yes, we do. EMC Concrete Coatings always prefers to visit you at your project site to take
measurements and go over your coatings/color options. Our quotes are valid for 90 days and there is never any pressure. We are not here to make you feel uncomfortable or pressured. Our process is smooth and easy for everyone involved.
Can you give me a “ball-park” price over the phone?
Yes. However, this is not the way we prefer to quote jobs. Each project is unique and a
“standard 2 car garage” is going to be different for every homebuilder in town. Square footage’s, linear walls, garage aprons, and condition of the slab all play a very important role in providing you with an accurate quote. This simply cannot be done in a matter of seconds via a phone call or messenger.
How much does it cost to install a decorative coating on my garage floor?
A typical 2 car garage coatings installation in the greater San Antonio area will cost between $2’400 and $3’000. Our pricing is based on square footages and other aspects of the project, including the linear footage of any stem walls, aprons, or repair work.

Oversized or multi-car garages, patios, or other areas will result in higher priced estimates.

Do you use epoxy or polyurea for garage coatings?
We use all the above. Resinous coatings do not come in a one size fits all application. The
details and specs of each project will help our trained technicians determine what coating is best for your project. Typically, we use polyurea coatings for our garages and patio installations. However, shop floors and other commercia/residential spaces will call for epoxies, urethanes, or water-based materials. Rest assured, no matter which products we use, they are from reputable coatings manufacturers and TDS sheets are always available to our customers upon
request.
Is this service affordable?
We are not the lowest priced team in town. We are also, certainly not the most expensive outfit on the block. Our pricing is determined by the costs of materials, inflation, demand, labor, and level of service. When choosing EMC Concrete Coatings, you have done yourself a great favor by hiring the best in the business. EMC does run specials throughout the calendar year for discounted floors and we always honor first responders, military, and front-line workers discounts.

Our team is always mindful of our customer’s budget. We are a locally owned and operated
small business, and we know the value of our hard-earned dollars and how much they mean to each one of us. We strive to provide our customers with the best possible pricing throughout the year. EMC honors our warranties, we show up on time, every time, and will go above and beyond to ensure you are 100% satisfied at the end of each project. If we miss the mark, we will rectify it. Simple as that.

Does my new floor come with a warranty?
Yes! We offer an excellent written warranty with all our floor coatings installations. Depending on which option you choose (stain, seal, epoxy/flake, solid color, or polish) the length of time will vary from 5 years to a limited lifetime homeowners’ warranty. We HONOR our warranties.
Who am I hiring if I choose EMC Concrete Coatings?
The best crew in town. From our brand-new trucks, wrapped-trailers, uniformed employees, and state of the art equipment – we are the best. Our technicians are certified and experienced installers. EMC is bonded, commercially insured, and experienced. Multiple professional references are available for commercial projects at any given time and our online reviews speak for themselves when it comes to our residential portfolio. You have made the right choice by calling the team at EMC Concrete Coatings. Most importantly, the owner of the company, Eric Calderon is personally involved in every project that comes through our door. Generally, Eric and his sales team will be the person you meet with at your project walk thru. You will then see Eric and his crew upon the day of installation. We never sub out our projects, our employees are in-house guys and Eric is there each step of the way to ensure maximum customer satisfaction!

Are you looking for the best Commercial Epoxy Flooring Contractors in San Antonio, TX? At EMC Concrete Coatings, we have more than 25 years of experience providing excellent quality and service to TX property owners. Reach out to us to get a free estimate.

Free Estimate

5 + 10 =

Servicing SAN ANTONIO TX & Surrounding Areas

  • BUDA, TX
  • Schertz, TX
  • San Marcos, TX
  • Pleasanton, TX

RECOGNIZED FOR DELIVERING SUPERIOR concrete SERVICES!

Countertop Resurfacing with Metallic Epoxy
Countertop Resurfacing with Metallic Epoxy
(210) 430-4181